Specification : PVC
| Application | Main Seat | Head Liner | |||||
|---|---|---|---|---|---|---|---|
| LS 1.0 mm. | LN 0.50 mm. | ||||||
| Test Items | Unit | Single knit | Double knit | Cross stitch knit | Single knit | Test Methods | |
| Thickness | mm. | 0.90 - 1.10 | 0.90 - 1.10 | 0.90 - 1.10 | 0.40 - 0.60 | ASTM D 751 | |
| Weight | g/m2 | min. 600 | min. 600 | min. 700 | min. 400 | ASTM D 751 | |
| Volatile | % | max. 3 | max. 3 | max. 3 | max. 3 | 100 C X 1 hr. | |
| Shrinkage | % | MD | max. 3 | max. 3 | max. 3 | max. 3 | 100 C X 1 hr. |
| TD | max. 3 | max. 3 | max. 3 | max. 3 | |||
| Elongation | % | MD | min. 25 | min. 25 | min. 60 | min. 60 | ASTM D 751 |
| TD | min. 150 | min. 150 | min. 120 | min. 200 | |||
| Tensile Strength | kg/3cm | MD | min. 7 | min. 12 | min. 25 | min. 25 | ASTM D 751 |
| TD | min. 3 | min. 9 | min. 15 | min. 9 | |||
| Tear Strength | kg. | MD | min. 2 | min. 2 | min. 4 | min. 2 | ASTM D 751 |
| TD | min. 2 | min. 2 | min. 4 | min. 2 | |||
| Seperation Force | kg/3cm | MD | min. 1.2 | min. 1.2 | min. 2 | min. 1.2 | ASTM D 751 |
| TD | min. 1.2 | min. 1.2 | min. 2 | min. 1.2 | |||
| Application | Door Trim | Car Mat | sunvisor | |||||
|---|---|---|---|---|---|---|---|---|
| LX 1.80 mm. | CM 1.80 mm. | FO 0.40 mm. | ||||||
| Test Items | Unit | Unit | Test Methods | |||||
| Thickness | mm. | 1.60 - 2.00 | 1.62 - 1.98 | mm. | 0.36 - 0.40 | ASTM D 374 | ||
| Weight | g/m2 | min. 1,300 | min. 2,500 | g/m. | min. 450 | ASTM D 3776 | ||
| Volatile | % | max. 2 | max. 2 | % | max. 5 | 100 C X 1 hr. | ||
| Shrinkage | % | MD | max. 5 | max. 3 | % | MD | max. 6 | 100 C X 1 hr. |
| TD | max. 3 | max. 3 | TD | max. 2 | ||||
| Elongation | % | MD | min. 240 | min. 150 | % | MD | min. 160 | ASTM D 822 |
| TD | min. 240 | min. 150 | TD | min. 160 | ||||
| Tensile Strength | kg/3cm | MD | min. 8 | min. 15 | kg/cm | MD | min. 5 | ASTM D 822 |
| TD | min. 8 | min. 13 | TD | min. 5 | ||||
| Tear Strength | kg. | MD | min. 3 | min. 2.5 | kg. | MD | min. 1.4 | ASTM D 1004 |
| TD | min. 3 | min. 2.5 | TD | min. 1.4 | ||||
| Thickness | 50 - 60 | 70 - 80 | ASTM D 2240 | |||||
The following special specifications/requirements can be requested:
- Flame retardance
- Light resistance
- Cold crack resistance
- Fogging resistance
- Non-toxic
- Cleanability
- Heat resistance
- Seam strength
- Abrasion resistance